Fargo Colour Ribbon YMCKO (500 images) – HRF45610

Red Hi-Vis reflective portrait armband card holder with an adjustable elastic strap.

- Red Hi-Vis for safety and WHS
- High quality plastic and backing
- Elastic adjustable red band
- Perfect for dock workers or areas requiring hi-vis attire
- Insert Size: 70mm (w) x 105mm (h)
- Outer Size: 150mm (w) x 116mm (h)
- Comes in packs of 10

Economy clear portrait flexible ID card holder with a blue top, a slot in the centre and one hole either side of the slot.

- Perfect for increasing visual identification
- Cost effective to hold staff IDs
- Insert Size: 61mm (w) x 86mm (h)
- Outer Size: 67mm (w) x 108mm (h)
- Comes in packs of 100

This card holder is suitable for most attachments. Paired with a double ended lanyard, this card holder won't rotate when worn.

HID Ultra white poly composite PVC cards are CR80 size (86mm x 54mm) and 750mic/30mil/0.75mm thick. These ID cards are for the use with reverse transfer printers like the Fargo HDP5000 card printer.

This Silver Ribbon is suited for the Evolis Pebble, Dualys & Quantum ID card printers. This printer ribbon has approximately 1,000 prints per roll.

This Gold Ribbon is suited for the Evolis Zenius & Primacy ID card printers. This printer ribbon has approximately 1,000 prints per roll.

Clear portrait reinforced flexible ID card holder with a slot in the centre and one hole on either side of the slot.

Clear landscape flexible ID card holder with a slot in the centre and a hole in both corners at the top of the holder. - Large format card holder - Quality plastic - Insert Size: 110mm (w) x 90mm (h) - Outer Size: 118mm (w) x 114mm (h) - Comes in packs of 50 This card holder is suitable for most attachments. Paired with a double ended lanyard, this card holder won't rotate when worn.

Matica overlay ribbon with "Card-Waves" design (1,250 images) Suits Matica ILM-LS Single and Dual Side Lamination Units and older ILU and ILM Units

Frosted landscape rigid ID card dispenser with side card entry, thumb slide hole and a slot in the centre at the top with holes both sides of the slot.

- Holds one card standard (30mil) card.
- Insert Size: 86mm (w) x 54mm (h)
- Outer Size: 90mm (w) x 63mm (h)

We recommend using a strap or the included belt clip with this card holder.

Black landscape and portrait uv protected rigid double sided card cradle with strap slot both on the short edge and the long edge. - Holds two standard (30mil) cards, one per side - Portrait or landscape orientation - Insert Size: 86mm (w) x 54mm (h) - Outer Size: 94mm (w) x 63mm (h) This card holder is suitable for most attachments.

Bright purple tamper resistant soft vinyl wristbands with thick writable section and adjustable sizing.