<

Blank White PVC ID Cards – CAR415

Standard blank PVC ID cards are CR80 size (86mm x 54mm) and 750mic/30mil/0.76mm thick. These blank PVC cards are suited for most ID card printers.

Card Size: CR80 (86mm x 54mm)
Card Thickness: 30mil
Card Type: Standard
Colour: Standard White
Pack Size: 100

Standard blank PVC ID cards are CR80 size (86mm x 54mm) and 750mic/30mil/0.76mm thick. These blank PVC cards are suited for most ID card printers.

SKU CAR415
Blank White PVC ID Cards – CAR415

Blank White PVC ID Cards – CAR415

No ratings yet. Add one now.
Standard blank PVC ID cards are CR80 size (86mm x 54mm) and 750mic/30mil/0.76mm thick. These blank PVC cards are suited for most ID card printers.

Related Products

SKU: CHRC01W
The Product Thumbnail
ID Card Cradle – White – CHRC01W

ID Card Cradle – White – CHRC01W

White rigid landscape and portrait card cradle with a slot both on the short edge and the long edge of the cradle and a clip that can be connected to the back both directions.
SKU: CHRC01W
No ratings yet. Add one now.
SKU: WBM-LARGE SIZE
The Product Thumbnail
Mifare Wristband Large (Not Encoded) – WBM-Large size

Mifare Wristband Large (Not Encoded) – WBM-Large size

Mifare 1K Wristband (Large) Chip insert size: 3mm x 25mm Colour: Black Frequency: 13.56MHz, etc IC Chip: Mifare 1K S50/MF1 S50 Encoding available for extra
SKU: WBM-LARGE SIZE
No ratings yet. Add one now.
SKU: LSPB4-BK
The Product Thumbnail
Premium Lanyard with Breakaway and Reel -Black – LSPB4-BK

Premium Lanyard with Breakaway and Reel -Black – LSPB4-BK

Black premium lanyard with a black retractable reel, clear vinyl strap clip and safety breakaway. - Retractable reel to enable easy use of an attached card or holder - Safety breakaway for safety and WHS purposes - Premium lanyard quality - Width: 12mm - Length: 900mm - Material: Flat tubular - Comes in packs of 10
SKU: HRER6F003SAA
The Product Thumbnail
6 Panel Colour Ribbon for Evolis Primacy – HRER6F003SAA

6 Panel Colour Ribbon for Evolis Primacy – HRER6F003SAA

This 6 Panel Colour Ribbon is suited for the Evolis Primacy ID card printers. This printer ribbon has approximately 200 prints per roll.
SKU: CHFV11-VP
The Product Thumbnail
Heavy Duty Soft Plastic ID Card Holder – CHFV11-VP

Heavy Duty Soft Plastic ID Card Holder – CHFV11-VP

Clear heavy-duty portrait soft plastic ID card holder. This holder can be self-locked due to opening being at the very top and it has a slot in the centre on both sides. – Heavy duty for longer wear – Self-locking – Insert Size: 61 mm (w) x 104 mm (h) – Outer Size: 66 mm […]
SKU: CHREC01K-VP
The Product Thumbnail
Eco-Friendly Card Holder – CHREC01K-VP

Eco-Friendly Card Holder – CHREC01K-VP

Black landscape and portrait eco-friendly rigid ID card cradle with strap slot both on the short edge and the long edge. – Holds one standard (30 mil) card. – Portrait or landscape orientation – Insert Size: 86 mm (w) x 54 mm (h) – Outer Size: 94 mm (w) x 62 mm (h) This card […]
SKU: CHREC01K-VP
No ratings yet. Add one now.
SKU: LPS-VP VISITOR
The Product Thumbnail
Victoria Police Visitor Lanyard – LPS-VP Visitor

Victoria Police Visitor Lanyard – LPS-VP Visitor

Victoria Police lanyards are a 12 mm red flat-tube lanyard with heavy-duty swivel hook, safety breakaway and the Victoria Police Visitor design printed in white.
SKU: LPS-VP VISITOR
No ratings yet. Add one now.
SKU: CHLV02
The Product Thumbnail
Lockable ID Card Holder – CHLV02

Lockable ID Card Holder – CHLV02

Frosted portrait lockable card holder with a slot at the centre of the top. (no keys supplied)

- Ensure ID's and access cards can't be removed without a key
- Increased hanging strength with slot through the holder
- High quality hard plastic
- Insert Size: 54mm (w) x 86mm (h)
- Outer Size: 57mm (w) x 96mm (h)
- Comes in packs of 50


This card holder is suitable for a strap clip attachment.
SKU: CHLV02
No ratings yet. Add one now.
SKU: RRE337
The Product Thumbnail
The Original KEY-BAK Retractable Key Holder – RRE337

The Original KEY-BAK Retractable Key Holder – RRE337

The Original KEY-BAK Super Duty Retractable Key Holder - 91.44 cm Kevlar Cord. - Holds up to 425 g (up to 22 keys). - Textured black vinyl and steel case with a 5 cm diameter. - Belt clip for easy attachment to a belt or clothing. - Slide-in ball and pin lock to ensure the weight of an attachment doesn't pull out the cord. - Slide-out ball and pin for easy release. - Attach with either a Stainless-Steel Belt Clip, Stainless Steel Belt Loop or a Rotating Removable Belt Clip.
SKU: LSPB22-BK
The Product Thumbnail
Premium Black Double Ended Lanyard with Breakaway – LSPB22-BK

Premium Black Double Ended Lanyard with Breakaway – LSPB22-BK

Black premium double ended lanyard with a side safety breakaway and two swivel hooks.

- Double swivel hook for connecting to both sides of a card holder to stop the holder rotating
- Safety breakaway for safety and WHS purposes
- Premium lanyard quality
- Width: 12mm
- Length: 900mm
- Material: Flat tubular
- Comes in packs of 100
SKU: SR-Coveralls
The Product Thumbnail
Polypropylene Coveralls (Various Sizes) – SR-Coveralls

Polypropylene Coveralls (Various Sizes) – SR-Coveralls

Polypropylene Coveralls. Available Sizes Small Medium Large Extra Large *To order various sizes; due to the min order quantity of 5, please first, add 5 to your cart of the one size, then add additional sizes, then at checkout, you can review and adjust your quantities of each size as required.  
SKU: HRER2011
The Product Thumbnail
Black Ribbon for Evolis Pebble, Dualys & Quantum – HRER2011

Black Ribbon for Evolis Pebble, Dualys & Quantum – HRER2011

This Black Ribbon is suited for the Evolis Pebble, Dualys & Quantum ID card printers. This printer ribbon has approximately 1,000 prints per roll.